LC4032ZC-5T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 800 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032ZC-5T48C Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 48-LQFP package contains the item.This device has 32 I/O ports programmed into it.48terminations have been programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 1.8Vvolts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.The ispMACH? 4000Zseries FPGA is one of these types.There are 48pins on the chip.This device also displays [0].LC4032contains its related parts.As a building block for digital circuits, there are 800gates.For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].The electronic component is mounted by Surface Mount.There are 48pins on it.There is a maximum supply voltage of 1.9Vwhen the device is operating.A minimum supply voltage of 1.7V is required for it to operate.There are 208 programmable I/Os in this system.This frequency can be achieved at 250MHz.A total of 4dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 2 logic elements or cells.
LC4032ZC-5T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032ZC-5T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-5T48C CPLDs applications.
- Preset swapping
- Storage Cards and Storage Racks
- Voltage level translation
- Parity generators
- I/O PORTS (MCU MODULE)
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Programmable polarity
- D/T registers and latches
- POWER-SAVING MODES
- Power up sequencing
