LC4032ZC-75M56C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 800 |
| Number of Programmable I/O | 208 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4032ZC-75M56C Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 56-LFBGA, CSPBGA package contains the item.As you can see, this device has 32 I/O ports programmed into it.56terminations are programmed into the device.This electrical part is wired with a terminal position of BOTTOM.It is powered from a supply voltage of 1.8V.The part is included in Programmable Logic Devices.As a result, it is packaged as Tray.It operates with the operating temperature of 0°C~90°C TJ to ensure its reliability.Mount the chip by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.It is programmed with 56 pins.Additionally, this device is capable of displaying [0].The LC4032indicates that related parts can be found.There are 800 gates, which are devices that acts as a building block for digital circuits. If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 56 pins embedded in the device.A maximum voltage of 1.9Vis required for operation.A minimum supply voltage of 1.7V is required for it to operate.There are a total of 2 logic elements or blocks.A total of 208programmable I/Os are available.You can achieve 178.57MHzfrequencies.Its basic building block is composed of 36 logic blocks (LABs).A total of 4dedicated inputs are available for the purpose of detecting input signals.
LC4032ZC-75M56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
56 pins
36 logic blocks (LABs)
LC4032ZC-75M56C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-75M56C CPLDs applications.
- Complex programmable logic devices
- Page register
- Programmable polarity
- Programmable power management
- Voltage level translation
- STANDARD SERIAL INTERFACE UART
- Software-driven hardware configuration
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
- Code converters
