LC4032ZC-75M56I
| Parameters | |
|---|---|
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4032 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Gates | 800 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 2 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
LC4032ZC-75M56I Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 56-LFBGA, CSPBGA package.In this case, there are 32 I/Os programmed.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.It is a part of the family [0].As a result, it is packaged as Tray.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.The FPGA belongs to the ispMACH? 4000Z series.It is equipped with 56 pin count.When using this device, YEScan also be found.The LC4032indicates that related parts can be found.As a building block for digital circuits, there are 800gates.For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.In this case, it is mounted by Surface Mount.It is designed with 56 pins.In this case, the maximum supply voltage is 1.9V.With a minimal supply voltage of [0], it operates.There are 2 logic elements/blocks.A programmable I/O count of 208 has been recorded.It is possible to achieve a frequency of 178.57MHz.There are 4 dedicated inputs used to detect the status of input signals.As a fundamental building block, there are 36 logic elements/cells.
LC4032ZC-75M56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
56 pins
LC4032ZC-75M56I Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-75M56I CPLDs applications.
- Reset swapping
- Power automation
- Synchronous or asynchronous mode
- Complex programmable logic devices
- Timing control
- TIMERS/COUNTERS
- STANDARD SERIAL INTERFACE UART
- Software-driven hardware configuration
- Storage Cards and Storage Racks
- Code converters
