LC4032ZC-75MN56I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Supplier Device Package | 56-CSBGA (6x6) |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | 0°C |
| Base Part Number | LC4032 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Nominal Supply Current | 50μA |
| Memory Type | EEPROM |
| Number of Gates | 800 |
| Max Frequency | 267MHz |
| Number of Programmable I/O | 208 |
| Number of Logic Blocks (LABs) | 2 |
| Number of Macro Cells | 32 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 2 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4032ZC-75MN56I Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].The device is programmed with 32 I/O ports.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH? 4000Z series.The LC4032contains its related parts.In digital circuits, there are 800gates, which act as a basic building block.The supply voltage should be maintained at 1.8V for high efficiency.It is recommended to store data in [0].This device is mounted by Surface Mount.This board has 56 pins.A voltage of 1.9V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 2 logic elements or blocks present.There are a total of 208 Programmable I/Os.It is recommended not to exceed 267MHzin terms of frequency.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be lower than 105°C.There are 2 logic blocks (LABs) in its basic building block.
LC4032ZC-75MN56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pins
2 logic blocks (LABs)
LC4032ZC-75MN56I Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZC-75MN56I CPLDs applications.
- Multiple Clock Source Selection
- Code converters
- Programmable power management
- ROM patching
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Complex programmable logic devices
- Software Configuration of Add-In Boards
- Multiple DIP Switch Replacement
- High speed graphics processing
- Digital multiplexers
