LC4032ZE-5TN48C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000ZE |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 277.78MHz |
| Base Part Number | LC4032 |
| Pin Count | 48 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 50μA |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 5.8 ns |
| Number of Logic Elements/Cells | 2 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4032ZE-5TN48C Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 48-LQFP package.The device is programmed with 32 I/Os.The termination of a device is set to [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 1.8V is used as the power supply for this device.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000ZE series.The chip is programmed with 48 pins.It is also characterized by YES.According to the LC4032, its related parts can be found.In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.This electronic part is mounted in the way of Surface Mount.The pins are [0].A maximum supply voltage of 1.9Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.This frequency can be achieved at 277.78MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 2 logic elements or cells.
LC4032ZE-5TN48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4032ZE-5TN48C Applications
There are a lot of Lattice Semiconductor Corporation LC4032ZE-5TN48C CPLDs applications.
- PLC analog input modules
- Address decoders
- Preset swapping
- LED Lighting systems
- ROM patching
- Multiple DIP Switch Replacement
- Dedicated input registers
- Auxiliary Power Supply Isolated and Non-isolated
- Configurable Addressing of I/O Boards
- I/O expansion
