LC4064B-10T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-10T100I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].It is programmed with 64 I/Os.The device is programmed with 100 terminations.This electrical part is wired with a terminal position of QUAD.A voltage of 2.5V is used as the power supply for this device.The part is included in Programmable Logic Devices.Package the chip by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000B series.Chips are programmed with 100 pins.If this device is used, you will also be able to find [0].The LC4064indicates that its related parts can be found.For high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.The pins are [0].In this case, the maximum supply voltage is 2.7V.It operates with the minimal supply voltage of 2.3V.A total of 208 Programmable I/Os are available.It is important to make sure that the maximum frequency is less than 400MHz.A total of 10dedicated inputs are available for detecting the status of input signals.There are 4 logic elements/cells to form a fundamental building block.
LC4064B-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064B-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-10T100I CPLDs applications.
- Programmable polarity
- ToR/Aggregation/Core Switch and Router
- Cross-Matrix Switch
- Parity generators
- State machine control
- Handheld digital devices
- Digital systems
- I/O PORTS (MCU MODULE)
- STANDARD SERIAL INTERFACE UART
- Address decoders
