LC4064B-10T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-10T44I Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 44-TQFPpackage, you will find it.The device has 30inputs and outputs.44terminations have been programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.Package the chip by Tray.The temperature at which it operates is set to -40°C~105°C TJin order to ensure its reliability.There should be a Surface Mounton the chip.The ispMACH? 4000Bseries comprises this type of FPGA.It is equipped with 44 pin count.This device can also display [0].There are related parts in [0].For high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.There are 44 pins on the device.A maximum supply voltage of 2.7Vis used in its operation.Despite its minimal supply voltage of [0], it is capable of operating.There are 4 logic elements/blocks.Programmable I/Os are counted up 208.It is recommended not to exceed 400MHzin terms of frequency.The status of input signals is detected by 2dedicated inputs.
LC4064B-10T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064B-10T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-10T44I CPLDs applications.
- Handheld digital devices
- PULSE WIDTH MODULATION (PWM)
- DDC INTERFACE
- DMA control
- Bootloaders for FPGAs
- D/T registers and latches
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Digital systems
- Custom shift registers
- I2C BUS INTERFACE
