LC4064B-25TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 454.5MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-25TN100C Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].It is equipped with 64I/O ports.100terminations are programmed into the device.Its terminal position is QUAD.It is powered by a voltage of 2.5V volts.This part is part of the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].It is recommended that Surface Mountholds the chip in place.In this case, it is a type of FPGA belonging to the ispMACH? 4000B series.It is programmed with 100 pins.When using this device, YESis also available.The LC4064indicates that related parts can be found.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In order to store data, EEPROMis used.In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.This device operates at a voltage of 2.7Vas its maximum supply voltage.In order for it to operate, a supply voltage of 2.3Vis required.There are 208 programmable I/Os in this system.The frequency that can be achieved is 454.5MHz.There are 10 dedicated inputs used to detect the status of input signals.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064B-25TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064B-25TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-25TN100C CPLDs applications.
- Multiple Clock Source Selection
- Discrete logic functions
- Digital designs
- Handheld digital devices
- USB Bus
- Protection relays
- DMA control
- Portable digital devices
- Software Configuration of Add-In Boards
- Programmable power management
