LC4064B-5T44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-5T44C Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].As you can see, this device has 30 I/O ports programmed into it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.Power is supplied by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4000Bseries of FPGAs.With 44pins programmed, the chip is ready to use.When using this device, YEScan also be found.The LC4064shows its related parts.The supply voltage should be maintained at 2.5V for high efficiency.In order to store data, EEPROMis used.Surface Mountis used to mount this electronic component.There are 44pins on it.In this case, the maximum supply voltage is 2.7V.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 208 has been recorded.It is recommended that the maximal frequency be lower than 400MHz.A total of 2dedicated inputs are available for detecting the status of input signals.A fundamental building block of logic consists of 4logic elements/cells.
LC4064B-5T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4064B-5T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-5T44C CPLDs applications.
- Power automation
- Portable digital devices
- POWER-SAVING MODES
- Battery operated portable devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Programmable polarity
- ROM patching
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom state machines
- Discrete logic functions
