LC4064B-5T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-5T48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 48-LQFP package.In this case, there are 32 I/Os programmed.The device is programmed with 48 terminations.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 2.5V voltage supply for this device.It is a part of the family [0].As a result, it is packaged as Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.It is a type of FPGA belonging to the ispMACH? 4000B series.48pins are programmed on the chip.It is also characterized by YES.Its related parts can be found in the [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.The pins are [0].There is a maximum supply voltage of 2.7V.It operates with the minimal supply voltage of 2.3V.A programmable I/O count of 208 has been recorded.It should be below 400MHzat the maximal frequency.Input signals are detected using 4dedicated inputs.Fundamental building blocks consist of 4logic elements/cells.
LC4064B-5T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064B-5T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-5T48I CPLDs applications.
- Multiple DIP Switch Replacement
- Software Configuration of Add-In Boards
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Parity generators
- Timing control
- Software-driven hardware configuration
- POWER-SAVING MODES
- Address decoding
- Custom state machines
- PLC analog input modules
