LC4064B-5TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-5TN100C Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].In this case, there are 64 I/Os programmed.100terminations have been programmed into the device.The terminal position of this electrical component is QUAD.The device is powered by a voltage of 2.5V volts.This part is part of the family [0].Trayis the packaging method.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.In this chip, the 100pins are programmed.When using this device, YESis also available.The LC4064indicates that related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.It is mounted by Surface Mount.The device is designed with pins [0].A maximum voltage of 2.7Vis required for operation.Normally, it operates with a voltage of 2.3VV as its minimum supply voltage.A total of 208Programmable I/Os are present.Ideally, the maximal frequency should be lower than 400MHz Hz.The status of input signals is detected by 10dedicated inputs.A fundamental building block of logic consists of 4logic elements/cells.
LC4064B-5TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064B-5TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-5TN100C CPLDs applications.
- Power up sequencing
- Complex programmable logic devices
- INTERRUPT SYSTEM
- Parity generators
- I/O expansion
- Address decoding
- Preset swapping
- Timing control
- STANDARD SERIAL INTERFACE UART
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
