LC4064B-5TN100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-5TN100I Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with 100-LQFP.As you can see, this device has 64 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.An electrical supply voltage of 2.5V is used to power it.It is included in Programmable Logic Devices.Package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the ispMACH? 4000B series.It is programmed with 100 pins.This device is also capable of displaying [0].Its related parts can be found in the [0].The supply voltage should be maintained at 2.5V for high efficiency.It is recommended to store data in [0].In this case, it is mounted by Surface Mount.A total of 100pins are provided on this board.This device operates at a voltage of 2.7V when the maximum supply voltage is applied.Despite its minimal supply voltage of [0], it is capable of operating.A programmable I/O count of 208 has been recorded.Ideally, the maximal frequency should be lower than 400MHz Hz.The status of input signals is detected by 10dedicated inputs.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064B-5TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064B-5TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-5TN100I CPLDs applications.
- Auxiliary Power Supply Isolated and Non-isolated
- Wide Vin Industrial low power SMPS
- Handheld digital devices
- High speed graphics processing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power Meter SMPS
- Custom shift registers
- Digital systems
- Digital designs
- ROM patching
