LC4064B-5TN48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-5TN48I Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].It is equipped with 32I/O ports.There is a 48terminations set on devices.Its terminal position is QUAD.The power supply voltage is 2.5V.The part is included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.As part of the ispMACH? 4000Bseries, it is a type of FPGA.The chip is programmed with 48 pins.When using this device, YESis also available.LC4064contains its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.The pins are [0].There is a maximum supply voltage of 2.7V.With a minimal supply voltage of [0], it operates.In total, there are 208programmable I/Os.It is recommended that the maximum frequency be less than 400MHz.There are 4 dedicated inputs used to detect the status of input signals.There are 4 logic elements/cells on the device.
LC4064B-5TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064B-5TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-5TN48I CPLDs applications.
- Voltage level translation
- Portable digital devices
- DMA control
- Software-Driven Hardware Configuration
- TIMERS/COUNTERS
- Interface bridging
- D/T registers and latches
- High speed graphics processing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- INTERRUPT SYSTEM
