LC4064B-75T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Programmable I/O | 208 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-75T100I Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 100-LQFPpackage, you will find it.It is programmed with 64 I/Os.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 2.5Vprovides power to the device.It belongs to the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Bseries FPGA.It is equipped with 100 pin count.The device can also be used to find [0].There are related parts in [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].This device is mounted by Surface Mount.The pins are [0].A maximum voltage of 2.7Vis required for operation.It is powered by 2.3Vas its minimum supply voltage.There are 4 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.In total, there are 208programmable I/Os.This frequency can be achieved at 178.57MHz.There are 36logic blocks (LABs) that make up its basic building block.The input signals are detected by 10dedicated inputs.
LC4064B-75T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
36 logic blocks (LABs)
LC4064B-75T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-75T100I CPLDs applications.
- Dedicated input registers
- ToR/Aggregation/Core Switch and Router
- D/T registers and latches
- Discrete logic functions
- STANDARD SERIAL INTERFACE UART
- Portable digital devices
- Digital multiplexers
- Auxiliary Power Supply Isolated and Non-isolated
- Random logic replacement
- Timing control
