LC4064B-75T44C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-75T44C Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is contained in package [0].This device has 30 I/O ports programmed into it.Terminations of devices are set to [0].This electrical part is wired with a terminal position of QUAD.The power supply voltage is 2.5V.There is a part included in Programmable Logic Devices.It is packaged in the way of Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.As part of the ispMACH? 4000Bseries, it is a type of FPGA.The chip is programmed with 44 pins.This device also displays [0].The LC4064shows its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.The device has a pinout of [0].This device operates at a voltage of 2.7Vas its maximum supply voltage.Initially, it requires a voltage of 2.3Vas the minimum supply voltage.A total of 4logic elements/blocks are present.Programmable I/Os are counted up 208.It is important to make sure that the maximum frequency is less than 400MHz.The input signals are detected by 2dedicated inputs.
LC4064B-75T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4064B-75T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-75T44C CPLDs applications.
- Power Meter SMPS
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Reset swapping
- Handheld digital devices
- Dedicated input registers
- Digital multiplexers
- TIMERS/COUNTERS
- PLC analog input modules
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- High speed graphics processing
