LC4064B-75T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-75T44I Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).A 44-TQFP package contains the item.It is programmed with 30 I/Os.There are 44 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The device is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.As part of the ispMACH? 4000Bseries, it is a type of FPGA.With 44pins programmed, the chip is ready to use.This device is also capable of displaying [0].There are related parts in [0].In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.The 44pins are designed into the board.A maximum voltage of 2.7Vis required for operation.It is powered by 2.3Vas its minimum supply voltage.A total of 208programmable I/Os are available.It is recommended that the maximum frequency be less than 400MHz.The input signals are detected by 2dedicated inputs.As a fundamental building block, there are 4 logic elements/cells.
LC4064B-75T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064B-75T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-75T44I CPLDs applications.
- DMA control
- Battery operated portable devices
- Address decoders
- Software-driven hardware configuration
- Digital systems
- ToR/Aggregation/Core Switch and Router
- INTERRUPT SYSTEM
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- TIMERS/COUNTERS
- POWER-SAVING MODES
