LC4064B-75TN100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-75TN100I Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 100-LQFP package.The device is programmed with 64 I/Os.Terminations of devices are set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power supply voltage is 2.5V.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH? 4000Bseries contain this type of chip.It is equipped with 100 pin count.This device also displays [0].There are related parts in [0].High efficiency requires a voltage supply of [0].It is recommended that data be stored in [0].Surface Mountmounts this electronic component.The device is designed with pins [0].It operates with the maximal supply voltage of 2.7V.With a minimal supply voltage of [0], it operates.This logic block consists of 4logic elements.Currently, there are 208 Programmable I/Os available.Ideally, the maximal frequency should be lower than 400MHz Hz.Input signals are detected by 10dedicated inputs.
LC4064B-75TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064B-75TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-75TN100I CPLDs applications.
- Software-Driven Hardware Configuration
- Preset swapping
- I/O expansion
- Digital multiplexers
- Field programmable gate
- Cross-Matrix Switch
- Programmable power management
- Software-driven hardware configuration
- ROM patching
- Complex programmable logic devices
