LC4064B-75TN44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000B |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 2.7V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064B-75TN44I Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].It is programmed with 30 I/Os.44terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 2.5Vprovides power to the device.This part is in the family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Ensure that the chip is mounted by Surface Mount.FPGAs belonging to the ispMACH? 4000Bseries contain this type of chip.With 44pins programmed, the chip is ready to use.If you use this device, you will also find [0].In accordance with the [0], its related parts are listed.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.A Surface Mountis mounted on this electronic component.A total of 44pins are provided on this board.This device operates at a voltage of 2.7Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.A total of 208Programmable I/Os are present.The maximal frequency should be lower than 400MHz.There are 2 dedicated inputs used to detect the status of input signals.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064B-75TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064B-75TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064B-75TN44I CPLDs applications.
- I2C BUS INTERFACE
- ON-CHIP OSCILLATOR CIRCUIT
- Configurable Addressing of I/O Boards
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoders
- USB Bus
- Digital designs
- Cross-Matrix Switch
- Bootloaders for FPGAs
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
