LC4064C-10T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 1999 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 30 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-10T44I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.44-TQFPis the package in which it resides.It is programmed with 30 I/Os.It is programmed to terminate devices at [0].Its terminal position is QUAD.The power source is powered by 1.8Vvolts.The part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of -40°C~105°C TJin order to ensure its reliability.There should be a Surface Mounton the chip.It is a type of FPGA belonging to the ispMACH? 4000C series.The chip is programmed with 44 pins.This device can also display [0].In accordance with the [0], its related parts are listed.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 44 pins embedded in the device.A voltage of 1.95V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.4logic elements/blocks exist.Currently, there are 208 Programmable I/Os available.There can be 125MHz frequency achieved.To detect input signals, there are 2 dedicated inputs.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4064C-10T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064C-10T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-10T44I CPLDs applications.
- Page register
- High speed graphics processing
- Dedicated input registers
- POWER-SAVING MODES
- Programmable power management
- Portable digital devices
- State machine design
- Field programmable gate
- Complex programmable logic devices
- Reset swapping
