LC4064C-10T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 32 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 208 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-10T48I Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 48-LQFPpackage, you will find it.It is equipped with 32I/O ports.Devices are programmed with terminations of [0].QUADis the terminal position of this electrical part.It is powered by a voltage of 1.8V volts.It is a part of family [0].Package the chip by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000C series.With 48pins programmed, the chip is ready to use.When using this device, YESis also available.The LC4064shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.It is adopted to store data in [0].Surface Mountis used to mount this electronic component.There are 48pins on it.There is a maximum supply voltage of 1.95V.A minimum supply voltage of 1.65V is required for it to operate.A total of 4logic elements/blocks are present.There are 208 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is important to make sure that the maximum frequency is less than 400MHz.Input signals are detected using 4dedicated inputs.
LC4064C-10T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064C-10T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-10T48I CPLDs applications.
- I2C BUS INTERFACE
- Battery operated portable devices
- Multiple DIP Switch Replacement
- Boolean function generators
- Digital multiplexers
- USB Bus
- Software-Driven Hardware Configuration
- Reset swapping
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Multiple Clock Source Selection
