LC4064C-10TN44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 30 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-10TN44I Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device has 30inputs and outputs.Terminations of devices are set to [0].This electrical component has a terminal position of 0.The power supply voltage is 1.8V.This part is in the family [0].Trayshould be used to package the chip.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.Chips should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.It is programmed with 44 pins.It is also characterized by YES.Its related parts can be found in the [0].For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.The 44pins are designed into the board.In this case, the maximum supply voltage is 1.95V.It is powered by 1.65Vas its minimum supply voltage.In total, there are 4 logic elements/blocks.A total of 256Programmable I/Os are present.This frequency can be achieved at 125MHz.A total of 2dedicated inputs are available for detecting the status of input signals.As a fundamental building block, there are 36 logic elements/cells.
LC4064C-10TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064C-10TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-10TN44I CPLDs applications.
- Boolean function generators
- Programmable power management
- STANDARD SERIAL INTERFACE UART
- Auxiliary Power Supply Isolated and Non-isolated
- Field programmable gate
- Configurable Addressing of I/O Boards
- Battery operated portable devices
- I2C BUS INTERFACE
- Pattern recognition
- Page register
