LC4064C-10TN48I
| Parameters | |
|---|---|
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 32 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
LC4064C-10TN48I Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 48-LQFP package.The device is programmed with 32 I/Os.There is a 48terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is supplied by a voltage of 1.8V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is mounted in the way of Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.With 48pins programmed, the chip is ready to use.When using this device, YEScan also be found.According to the LC4064, its related parts can be found.High efficiency requires the supply voltage to be maintained at [0].It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.There are 48pins on it.A maximum supply voltage of 1.95Vis used in its operation.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.This logic block consists of 4logic elements.A total of 256programmable I/Os are available.It is possible to achieve a frequency of 125MHz.A total of 4dedicated inputs are available for the purpose of detecting input signals.A fundamental building block of logic consists of 36logic elements/cells.
LC4064C-10TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064C-10TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-10TN48I CPLDs applications.
- PLC analog input modules
- Power up sequencing
- Battery operated portable devices
- Field programmable gate
- Digital multiplexers
- Parity generators
- Preset swapping
- Programmable power management
- Multiple DIP Switch Replacement
- Pattern recognition
