LC4064C-25T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 2.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-25T100C Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 100-LQFP package contains the item.There are 64 I/Os on the board.100terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 1.8V volts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.The ispMACH? 4000Cseries comprises this type of FPGA.There are 100 pins on the chip.When using this device, YESis also available.The LC4064contains its related parts.In order to maintain high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.The electronic part is mounted by Surface Mount.The device has a pinout of [0].It operates at a maximum supply voltage of 1.95V volts.A minimum supply voltage of 1.65V is required for this device to operate.There are a total of 256 Programmable I/Os.It should be below 400MHzat the maximal frequency.Input signals are detected by 10dedicated inputs.There are 4 logic elements/cells on the device.
LC4064C-25T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064C-25T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-25T100C CPLDs applications.
- Digital multiplexers
- Software-driven hardware configuration
- Handheld digital devices
- Multiple DIP Switch Replacement
- Parity generators
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Bootloaders for FPGAs
- Timing control
- Dedicated input registers
- Custom state machines
