LC4064C-25T44C
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 30 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 2.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
LC4064C-25T44C Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).44-TQFPis the package in which it resides.There are 30 I/Os on the board.Terminations of devices are set to [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered from a supply voltage of 1.8V.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.The ispMACH? 4000Cseries FPGA is one of these types.In this chip, the 44pins are programmed.It is also possible to find YESwhen using this device.The LC4064indicates that related parts can be found.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].Surface Mountmounts this electronic component.It is designed with 44 pins.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 1.65V.In total, there are 4 logic elements/blocks.Currently, there are 256 Programmable I/Os available.There should be a lower maximum frequency than 400MHz.Input signals are detected using 2dedicated inputs.
LC4064C-25T44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
LC4064C-25T44C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-25T44C CPLDs applications.
- Random logic replacement
- Power up sequencing
- Digital multiplexers
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- State machine design
- Dedicated input registers
- Multiple Clock Source Selection
- Multiple DIP Switch Replacement
- Battery operated portable devices
