LC4064C-5T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 32 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-5T48I Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).48-LQFPis the package in which it resides.There are 32 I/Os programmed in it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.The power supply voltage is 1.8V.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000C series.With 48pins programmed, the chip is ready to use.The device can also be used to find [0].LC4064contains its related parts.The supply voltage should be maintained at 1.8V for high efficiency.It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.A total of 48pins are provided on this board.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.Initially, it requires a voltage of 1.65Vas the minimum supply voltage.This logic block consists of 4logic elements.A total of 256 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 400MHz.Input signals are detected using 4dedicated inputs.
LC4064C-5T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064C-5T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-5T48I CPLDs applications.
- Timing control
- Bootloaders for FPGAs
- Dedicated input registers
- Digital designs
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Address decoders
- Custom shift registers
- Software-Driven Hardware Configuration
- Parity generators
- Storage Cards and Storage Racks
