LC4064C-5TN100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-5TN100C Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].There are 64 I/Os on the board.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 1.8V volts.This part is in the family [0].Trayshould be used to package the chip.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.This type of FPGA is a part of the ispMACH? 4000C series.The chip is programmed with 100 pins.This device can also display [0].LC4064contains its related parts.The supply voltage should be maintained at 1.8V for high efficiency.For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.The pins are [0].There is a maximum supply voltage of 1.95V.The minimal supply voltage is 1.65V.There are a total of 4 logic elements or blocks.There are 256 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the maximal frequency be lower than 400MHz.The status of input signals is determined by 10dedicated inputs.
LC4064C-5TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064C-5TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-5TN100C CPLDs applications.
- High speed graphics processing
- Bootloaders for FPGAs
- Handheld digital devices
- Reset swapping
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- State machine design
- ToR/Aggregation/Core Switch and Router
- Code converters
- I/O PORTS (MCU MODULE)
- Pattern recognition
