LC4064C-5TN100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-5TN100I Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).100-LQFPis the package in which it resides.As you can see, this device has 64 I/O ports programmed into it.Terminations of devices are set to [0].This electrical component has a terminal position of 0.A voltage of 1.8V is used as the power supply for this device.It is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispMACH? 4000C series.There are 100 pins on the chip.This device can also display [0].The LC4064indicates that related parts can be found.For high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].It is mounted by Surface Mount.The device is designed with pins [0].A maximum voltage of 1.95Vis required for operation.With a minimal supply voltage of [0], it operates.Currently, there are 256 Programmable I/Os available.It is recommended that the maximum frequency be less than 400MHz.Input signals are detected by 10dedicated inputs.There are 4 logic elements/cells to form a fundamental building block.
LC4064C-5TN100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064C-5TN100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-5TN100I CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Interface bridging
- PLC analog input modules
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I2C BUS INTERFACE
- Timing control
- Custom state machines
- Protection relays
- Synchronous or asynchronous mode
- ToR/Aggregation/Core Switch and Router
