LC4064C-75T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 64 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 400MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-75T100C Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 100-LQFP package.The device has 64inputs and outputs.100terminations are programmed into the device.This electrical part is wired with a terminal position of QUAD.A voltage of 1.8Vprovides power to the device.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].The chip should be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000C series.It is programmed with 100 pins.This device can also display [0].LC4064contains its related parts.The supply voltage should be maintained at 1.8V for high efficiency.In general, it is recommended to store data in [0].In this case, Surface Mountis used to mount the electronic component.A total of 100pins are provided on this board.This device operates at a voltage of 1.95Vas its maximum supply voltage.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 256programmable I/Os.There should be a lower maximum frequency than 400MHz.To detect the status of input signals, there are 10dedicated inputs.There are 4 logic elements/cells to form a fundamental building block.
LC4064C-75T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064C-75T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-75T100C CPLDs applications.
- Protection relays
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Page register
- ON-CHIP OSCILLATOR CIRCUIT
- PLC analog input modules
- Custom state machines
- Complex programmable logic devices
- ROM patching
- PULSE WIDTH MODULATION (PWM)
