LC4064C-75T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 32 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-75T48C Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.48-LQFPis the package in which it resides.As you can see, this device has 32 I/O ports programmed into it.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 1.8V volts.There is a part in the family [0].As a result, it is packaged as Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4000Cseries, it is a type of FPGA.A chip with 48pins is programmed.Additionally, this device is capable of displaying [0].In accordance with the [0], its related parts are listed.The supply voltage should be maintained at 1.8V for high efficiency.It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 48 pins embedded in the device.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 1.65VV as its minimum supply voltage.A total of 256programmable I/Os are available.There can be 178.57MHz frequency achieved.There are 4 dedicated inputs used to detect the status of input signals.Fundamental building blocks consist of 4logic elements/cells.
LC4064C-75T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4064C-75T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-75T48C CPLDs applications.
- Synchronous or asynchronous mode
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Page register
- Software-Driven Hardware Configuration
- Cross-Matrix Switch
- Random logic replacement
- Multiple Clock Source Selection
- Timing control
- ROM patching
- POWER-SAVING MODES
