LC4064C-75TN44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000C |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2mA |
| Number of I/O | 30 |
| Nominal Supply Current | 2mA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Number of Logic Elements/Blocks | 4 |
| Height | 1mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LC4064C-75TN44I Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As you can see, this device has 30 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of QUAD.There is 1.8V voltage supply for this device.This part is included in Programmable Logic Devices.The chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.In FPGA terms, it is a type of ispMACH? 4000Cseries FPGA.44pins are programmed on the chip.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.This device is mounted by Surface Mount.There are 44 pins embedded in the device.This device operates at a voltage of 1.95V when the maximum supply voltage is applied.It is powered by 1.65Vas its minimum supply voltage.This logic element/block contains 4logic elements.There are 272 Programmable I/Os.It is possible to achieve a frequency of 178.57MHz.There are 2 dedicated inputs used to detect the status of input signals.There are 36 logic elements/cells to form a fundamental building block.
LC4064C-75TN44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064C-75TN44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064C-75TN44I CPLDs applications.
- D/T registers and latches
- TIMERS/COUNTERS
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Field programmable gate
- Address decoding
- Wide Vin Industrial low power SMPS
- Synchronous or asynchronous mode
- Protection relays
- Page register
- Boolean function generators
