LC4064V-10T100I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064V-10T100I Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is packaged with 100-LQFP.The device has 64inputs and outputs.100terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 3.3V.It is a part of family [0].It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].Surface Mountshould be used for mounting the chip.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.It is programmed with 100 pins.When using this device, YEScan also be found.The LC4064contains its related parts.The supply voltage should be maintained at 3.3V for high efficiency.Data is stored using [0].The electronic component is mounted by Surface Mount.There are 100pins on it.With a maximum supply voltage of [0], it operates.Normally, it operates with a voltage of 3VV as its minimum supply voltage.In total, there are 4 logic elements/blocks.Programmable I/Os are counted up 272.This frequency is 125MHz.The input signals are detected by 10dedicated inputs.There are 36 logic elements/cells to form a fundamental building block.
LC4064V-10T100I Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~105°C TJ
100 pin count
100 pins
LC4064V-10T100I Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-10T100I CPLDs applications.
- High speed graphics processing
- Portable digital devices
- I2C BUS INTERFACE
- I/O expansion
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
- Random logic replacement
- STANDARD SERIAL INTERFACE UART
- TIMERS/COUNTERS
- Multiple DIP Switch Replacement
