LC4064V-10T44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064V-10T44I Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 44-TQFP.In this case, there are 30 I/Os programmed.There is a 44terminations set on devices.QUADis the terminal position of this electrical part.The power supply voltage is 3.3V.This part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.The chip is programmed with 44 pins.The device can also be used to find [0].The LC4064contains its related parts.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.A total of 44pins are provided on this board.There is a maximum supply voltage of 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.A total of 272Programmable I/Os are present.It is possible to achieve a frequency of 125MHz.To detect input signals, there are 2 dedicated inputs.In order to form a fundamental building block, there are 4 logic elements or cells.
LC4064V-10T44I Features
44-TQFP package
30 I/Os
The operating temperature of -40°C~105°C TJ
44 pin count
44 pins
LC4064V-10T44I Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-10T44I CPLDs applications.
- Reset swapping
- Address decoders
- Portable digital devices
- Digital multiplexers
- State machine control
- USB Bus
- D/T registers and latches
- ON-CHIP OSCILLATOR CIRCUIT
- Power automation
- I/O expansion
