LC4064V-10TN48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064V-10TN48I Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].There are 32 I/Os programmed in it.48terminations have been programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000V series.In this chip, the 48pins are programmed.The device can also be used to find [0].The LC4064shows its related parts.In order to achieve high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].In this case, it is mounted by Surface Mount.There are 48 pins on the device.With a maximum supply voltage of [0], it operates.With a minimal supply voltage of [0], it operates.4logic blocks/elements are present.The frequency that can be achieved is 125MHz.To detect the status of input signals, there are 4dedicated inputs.Fundamental building blocks consist of 36logic elements/cells.
LC4064V-10TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064V-10TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-10TN48I CPLDs applications.
- Power automation
- Dedicated input registers
- State machine design
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
- Programmable polarity
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- State machine control
- Timing control
- Random logic replacement
