LC4064V-25TN44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 454.5MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 30 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 2.5 ns |
| Number of Programmable I/O | 272 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064V-25TN44C Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.You can find it in package [0].There are 30 I/Os on the board.44terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 3.3Vvolts.This part is part of the family [0].Ideally, the chip should be packaged by Tray.The temperature at which it operates is set to 0°C~90°C TJin order to ensure its reliability.Surface Mountshould be used for mounting the chip.FPGAs belonging to the ispMACH? 4000Vseries contain this type of chip.There are 44pins on the chip.When using this device, YESis also available.The LC4064can be used to identify its related parts.The supply voltage should be maintained at 3.3V for high efficiency.EEPROM is adopted for storing data.Surface Mountis the mounting point of this electronic part.There are 44pins on it.It operates with the maximal supply voltage of 3.6V.It operates with the minimal supply voltage of 3V.4logic blocks/elements are present.There are 272 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 454.5MHz frequency achieved.36logic blocks (LABs) make up this circuit.Input signals are detected using 2dedicated inputs.
LC4064V-25TN44C Features
44-TQFP package
30 I/Os
The operating temperature of 0°C~90°C TJ
44 pin count
44 pins
36 logic blocks (LABs)
LC4064V-25TN44C Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-25TN44C CPLDs applications.
- Cross-Matrix Switch
- Software Configuration of Add-In Boards
- State machine design
- Preset swapping
- Pattern recognition
- Wide Vin Industrial low power SMPS
- Software-Driven Hardware Configuration
- Software-driven hardware configuration
- Storage Cards and Storage Racks
- Configurable Addressing of I/O Boards
