LC4064V-5T48I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 227.27MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Nominal Supply Current | 12mA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 272 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064V-5T48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a 48-LQFP package.In this case, there are 32 I/Os programmed.48terminations are programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.The power source is powered by 3.3Vvolts.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~105°C TJ to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The ispMACH? 4000Vseries FPGA is one of these types.The chip is programmed with 48 pins.If you use this device, you will also find [0].The LC4064shows its related parts.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Normally, it operates with a voltage of 3VV as its minimum supply voltage.There are a total of 4 logic elements or blocks.Programmable I/Os are counted up 272.It is possible to achieve a frequency of 227.27MHz.The status of input signals is detected by 4dedicated inputs.Fundamental building blocks consist of 36logic elements/cells.
LC4064V-5T48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064V-5T48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-5T48I CPLDs applications.
- Digital designs
- POWER-SAVING MODES
- Software-Driven Hardware Configuration
- Digital systems
- Protection relays
- Multiple Clock Source Selection
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Preset swapping
- Field programmable gate
- Multiple DIP Switch Replacement
