LC4064V-75TN100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height | 1.4mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064V-75TN100C Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 100-LQFPpackage, you will find it.There are 64 I/Os programmed in it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of QUADand is connected to the ground.The device is powered by a voltage of 3.3V volts.It is included in Programmable Logic Devices.The chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000V series.A chip with 100pins is programmed.It is also possible to find YESwhen using this device.You can find its related parts in the [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.There are 100pins on it.It operates at a maximum supply voltage of 3.6V volts.A minimum supply voltage of 3V is required for this device to operate.In total, there are 4 logic elements/blocks.This frequency is 178.57MHz.A total of 10dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4064V-75TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064V-75TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-75TN100C CPLDs applications.
- Cross-Matrix Switch
- Programmable power management
- Digital designs
- White goods (Washing, Cold, Aircon ,...)
- D/T registers and latches
- Address decoding
- Power up sequencing
- Address decoders
- ROM patching
- Synchronous or asynchronous mode
