LC4064V-75TN48E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Weight | 9.071791g |
| Operating Temperature | -40°C~130°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000V |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 178.57MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 12mA |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Logic Elements/Cells | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064V-75TN48E Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The item is enclosed in a 48-LQFP package.There are 32 I/Os on the board.There are 48 terminations programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 3.3V is used as the power supply for this device.This part is included in Programmable Logic Devices.The chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispMACH? 4000Vseries FPGA.It has 48pins programmed.It is also possible to find YESwhen using this device.Its related parts can be found in the [0].The supply voltage should be maintained at 3.3V for high efficiency.It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.A total of 48pins are provided on this board.There is a maximum supply voltage of 3.6Vwhen the device is operating.It operates with the minimal supply voltage of 3V.This logic element/block contains 4logic elements.In this case, 178.57MHzis the frequency that can be achieved.A total of 4dedicated inputs are available for the purpose of detecting input signals.In order to form a fundamental building block, there are 36 logic elements or cells.
LC4064V-75TN48E Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~130°C TJ
48 pin count
48 pins
LC4064V-75TN48E Applications
There are a lot of Lattice Semiconductor Corporation LC4064V-75TN48E CPLDs applications.
- DMA control
- Cross-Matrix Switch
- Parity generators
- Complex programmable logic devices
- Dedicated input registers
- Page register
- Configurable Addressing of I/O Boards
- STANDARD SERIAL INTERFACE UART
- Portable digital devices
- State machine design
