LC4064ZC-37M132C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.7ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-37M132C Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a 132-LFBGA, CSPBGA package.As you can see, this device has 64 I/O ports programmed into it.There are 132 terminations programmed into the device.This electrical part is wired with a terminal position of BOTTOM.An electrical supply voltage of 1.8V is used to power it.This part is in the family [0].Ideally, the chip should be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.The ispMACH? 4000Zseries FPGA is one of these types.Chips are programmed with 132 pins.If this device is used, you will also be able to find [0].The LC4064shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 132pins on it.This device operates at a voltage of 1.9Vas its maximum supply voltage.In order for it to operate, a supply voltage of 1.7Vis required.There are 4 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.A total of 388programmable I/Os are available.The maximal frequency should be lower than 250MHz.The status of input signals is detected by 10dedicated inputs.
LC4064ZC-37M132C Features
132-LFBGA, CSPBGA package
64 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4064ZC-37M132C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37M132C CPLDs applications.
- Handheld digital devices
- Storage Cards and Storage Racks
- Digital systems
- PLC analog input modules
- Preset swapping
- USB Bus
- I/O expansion
- ON-CHIP OSCILLATOR CIRCUIT
- Auxiliary Power Supply Isolated and Non-isolated
- I/O PORTS (MCU MODULE)
