LC4064ZC-37MN56C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 333.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-37MN56C Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].The device is programmed with 32 I/Os.There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 1.8V voltage supply for this device.There is a part in the family [0].Trayshould be used for packaging the chip.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.The chip is programmed with 56 pins.It is also possible to find YESwhen using this device.In accordance with the [0], its related parts are listed.The supply voltage should be maintained at 1.8V for high efficiency.EEPROM is adopted for storing data.The electronic component is mounted by Surface Mount.There are 56 pins embedded in the device.A voltage of 1.9V is the maximum supply voltage for this device.A minimum supply voltage of 1.7V is required for this device to operate.There are 388 programmable I/Os in this system.It is possible to achieve a frequency of 333.3MHz.It has 12dedicated inputs for detecting input signals.There are 4 logic elements/cells on the device.
LC4064ZC-37MN56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
56 pins
LC4064ZC-37MN56C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37MN56C CPLDs applications.
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Auxiliary Power Supply Isolated and Non-isolated
- State machine design
- Handheld digital devices
- Digital systems
- State machine control
- Synchronous or asynchronous mode
- Cross-Matrix Switch
- Code converters
- Field programmable gate
