LC4064ZC-37T100C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 388 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.7ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-37T100C Overview
This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).You can find it in package [0].This device has 64 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.Power is provided by a supply voltage of 1.8V volts.It is a part of the family [0].It is recommended to package the chip by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.Mount the chip by Surface Mount.In terms of FPGAs, it belongs to the ispMACH? 4000Z series.There are 100 pins on the chip.The device can also be used to find [0].The LC4064shows its related parts.The supply voltage should be maintained at 1.8V for high efficiency.EEPROM is adopted for storing data.It is mounted by Surface Mount.The pins are [0].A voltage of 1.9V is the maximum supply voltage for this device.A minimum supply voltage of 1.7V is required for it to operate.In total, there are 4 logic elements/blocks.There are a total of 388 Programmable I/Os.There should be a lower maximum frequency than 250MHz.To detect the status of input signals, there are 10dedicated inputs.
LC4064ZC-37T100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064ZC-37T100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37T100C CPLDs applications.
- Pattern recognition
- ToR/Aggregation/Core Switch and Router
- TIMERS/COUNTERS
- DDC INTERFACE
- Discrete logic functions
- Boolean function generators
- Page register
- Software Configuration of Add-In Boards
- PLC analog input modules
- Auxiliary Power Supply Isolated and Non-isolated
