LC4064ZC-37TN100C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 3.7 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 432 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 3.7ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-37TN100C Overview
Currently, there are 64 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.The product is contained in a 100-LQFP package.There are 64 I/Os on the board.100terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 1.8Vprovides power to the device.It is included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at 0°C~90°C TJ to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.It belongs to the ispMACH? 4000Zseries of FPGAs.It has 100pins programmed.If this device is used, you will also be able to find [0].You can find its related parts in the [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.In order to store data, EEPROMis used.This electronic part is mounted in the way of Surface Mount.There are 100pins on it.There is a maximum supply voltage of 1.9V.A minimum supply voltage of 1.7V is required for this device to operate.There are 4 logic elements/blocks.There are 432 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It should be below 250MHzat the maximal frequency.The status of input signals is detected by 10dedicated inputs.
LC4064ZC-37TN100C Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~90°C TJ
100 pin count
100 pins
LC4064ZC-37TN100C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-37TN100C CPLDs applications.
- Protection relays
- TIMERS/COUNTERS
- I/O PORTS (MCU MODULE)
- ON-CHIP OSCILLATOR CIRCUIT
- Auxiliary Power Supply Isolated and Non-isolated
- Custom shift registers
- D/T registers and latches
- USB Bus
- I2C BUS INTERFACE
- Address decoders
