LC4064ZC-5M56C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Programmable I/O | 484 |
| Number of Logic Blocks (LABs) | 36 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-5M56C Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 32 I/Os.The device is programmed with 56 terminations.The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.A voltage of 1.8Vprovides power to the device.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.It operates with the operating temperature of 0°C~90°C TJ to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4000Zseries comprises this type of FPGA.There are 56 pins on the chip.This device can also display [0].The LC4064indicates that its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.A Surface Mountis mounted on this electronic component.There are 56 pins on the device.This device operates at a voltage of 1.9V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 1.7V.There are 4 logic elements or blocks present.A programmable I/O count of 484 has been recorded.This frequency can be achieved at 250MHz.It consists of 36 logic blocks (LABs).A total of 12dedicated inputs are available for detecting the status of input signals.
LC4064ZC-5M56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
56 pins
36 logic blocks (LABs)
LC4064ZC-5M56C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5M56C CPLDs applications.
- Multiple Clock Source Selection
- Digital systems
- Timing control
- Storage Cards and Storage Racks
- USB Bus
- Page register
- ROM patching
- Address decoders
- Digital multiplexers
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
