LC4064ZC-5M56I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Number of Pins | 56 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-5M56I Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 56-LFBGA, CSPBGA package.It is equipped with 32I/O ports.The device is programmed with 56 terminations.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 1.8V volts.It is a part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of -40°C~105°C TJ to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4000Z series.In this chip, the 56pins are programmed.If this device is used, you will also be able to find [0].In accordance with the [0], its related parts are listed.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountis used to mount this electronic component.There are 56pins on it.A voltage of 1.9V is the maximum supply voltage for this device.It operates with the minimal supply voltage of 1.7V.4logic blocks/elements are present.There are 484 Programmable I/Os.There is a maximum frequency of 250MHz.The status of input signals is determined by 12dedicated inputs.An elementary building block consists of 36logic elements/cells.
LC4064ZC-5M56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
56 pins
LC4064ZC-5M56I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5M56I CPLDs applications.
- ROM patching
- Page register
- TIMERS/COUNTERS
- Battery operated portable devices
- D/T registers and latches
- Software-Driven Hardware Configuration
- High speed graphics processing
- I2C BUS INTERFACE
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- POWER-SAVING MODES
