LC4064ZC-5MN132C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-5MN132C Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 132-LFBGA, CSPBGA package.It is programmed with 64 I/Os.There are 132 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered from a supply voltage of 1.8V.There is a part included in Programmable Logic Devices.Trayis the packaging method.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4000Z series.132pins are programmed on the chip.The device can also be used to find [0].You can find its related parts in the [0].The supply voltage should be maintained at 1.8V for high efficiency.In order to store data, EEPROMis used.This device is mounted by Surface Mount.A total of 132pins are provided on this board.There is a maximum supply voltage of 1.9Vwhen the device is operating.In order for it to operate, a supply voltage of 1.7Vis required.This logic block consists of 4logic elements.There are 484 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There should be a lower maximum frequency than 250MHz.Input signals are detected by 10dedicated inputs.
LC4064ZC-5MN132C Features
132-LFBGA, CSPBGA package
64 I/Os
The operating temperature of 0°C~90°C TJ
132 pin count
132 pins
LC4064ZC-5MN132C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5MN132C CPLDs applications.
- Battery operated portable devices
- Voltage level translation
- Programmable power management
- Pattern recognition
- Power up sequencing
- Power Meter SMPS
- ToR/Aggregation/Core Switch and Router
- High speed graphics processing
- I/O PORTS (MCU MODULE)
- Interface bridging
