LC4064ZC-5MN132I
| Parameters | |
|---|---|
| Height Seated (Max) | 1.35mm |
| Length | 8mm |
| Width | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 132-LFBGA, CSPBGA |
| Number of Pins | 132 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 132 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 64 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 10 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
LC4064ZC-5MN132I Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).132-LFBGA, CSPBGAis the package in which it resides.It is equipped with 64I/O ports.The termination of a device is set to [0].The terminal position of this electrical component is BOTTOM.An electrical supply voltage of 1.8V is used to power it.There is a part in the family [0].It is packaged in the way of Tray.The operating temperature of the machine is -40°C~105°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.The ispMACH? 4000Zseries comprises this type of FPGA.132pins are programmed on the chip.The device can also be used to find [0].You can find its related parts in the [0].In order to achieve high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.It is mounted by Surface Mount.The 132pins are designed into the board.It operates at a maximum supply voltage of 1.9V volts.Despite its minimal supply voltage of [0], it is capable of operating.A total of 484 Programmable I/Os are available.250MHzis the maximum frequency.The status of input signals is determined by 10dedicated inputs.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064ZC-5MN132I Features
132-LFBGA, CSPBGA package
64 I/Os
The operating temperature of -40°C~105°C TJ
132 pin count
132 pins
LC4064ZC-5MN132I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5MN132I CPLDs applications.
- Power automation
- Reset swapping
- Auxiliary Power Supply Isolated and Non-isolated
- POWER-SAVING MODES
- Multiple DIP Switch Replacement
- I/O expansion
- Synchronous or asynchronous mode
- Configurable Addressing of I/O Boards
- Dedicated input registers
- PULSE WIDTH MODULATION (PWM)
