LC4064ZC-5MN56C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-5MN56C Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.56-LFBGA, CSPBGAis the package in which it resides.There are 32 I/Os on the board.There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.BOTTOMis the terminal position of this electrical part.A voltage of 1.8V is used as the power supply for this device.There is a part in the family [0].As a result, it is packaged as Tray.The device operates at a temperature of 0°C~90°C TJin order to ensure its reliability.Surface Mountshould be used for mounting the chip.The ispMACH? 4000Zseries comprises this type of FPGA.56pins are programmed on the chip.Additionally, this device is capable of displaying [0].According to the LC4064, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.It is mounted by Surface Mount.A maximum voltage of 1.9Vis required for operation.A minimum supply voltage of 1.7V is required for it to operate.Programmable I/Os are counted up 484.Ideally, the maximal frequency should be lower than 250MHz Hz.Input signals are detected by 12dedicated inputs.A fundamental building block of logic consists of 4logic elements/cells.
LC4064ZC-5MN56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
LC4064ZC-5MN56C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5MN56C CPLDs applications.
- PLC analog input modules
- Boolean function generators
- D/T registers and latches
- Timing control
- USB Bus
- I2C BUS INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O PORTS (MCU MODULE)
- Programmable power management
- DMA control
