LC4064ZC-5MN56I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 4 |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 5ns |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-5MN56I Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is part of the 56-LFBGA, CSPBGA package.The device is programmed with 32 I/O ports.56terminations have been programmed into the device.This electrical part is wired with a terminal position of BOTTOM.An electrical supply voltage of 1.8V is used to power it.The part belongs to Programmable Logic Devices family.Trayis the packaging method.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.The ispMACH? 4000Zseries comprises this type of FPGA.In this chip, the 56pins are programmed.If this device is used, you will also be able to find [0].LC4064contains its related parts.Optimal efficiency requires a supply voltage of [0].Data storage is performed using [0].A Surface Mountis mounted on this electronic component.This device operates at a voltage of 1.9Vas its maximum supply voltage.It operates with the minimal supply voltage of 1.7V.There are 484 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is important to make sure that the maximum frequency is less than 250MHz.A total of 12dedicated inputs are available for detecting the status of input signals.In order to form a fundamental building block, there are 4logic elements/cells.
LC4064ZC-5MN56I Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of -40°C~105°C TJ
56 pin count
LC4064ZC-5MN56I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5MN56I CPLDs applications.
- I2C BUS INTERFACE
- Digital designs
- PLC analog input modules
- Software-Driven Hardware Configuration
- Field programmable gate
- STANDARD SERIAL INTERFACE UART
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Custom state machines
- I/O expansion
- Page register
