LC4064ZC-5T48C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-5T48C Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a 48-LQFP package.As a result, it has 32 I/O ports programmed.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.The device is powered by a voltage of 1.8V volts.It is a part of the family [0].As a result, it is packaged as Tray.To ensure its reliability, the operating temperature is set to [0].It is recommended to mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH? 4000Z series.48pins are programmed on the chip.If this device is used, you will also be able to find [0].In accordance with the [0], its related parts are listed.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].In this case, it is mounted by Surface Mount.It is designed with 48 pins.In this case, the maximum supply voltage is 1.9V.The minimal supply voltage is 1.7V.This logic block consists of 4logic elements.A total of 484programmable I/Os are available.The frequency that can be achieved is 250MHz.A total of 4dedicated inputs are available for detecting the status of input signals.As a fundamental building block, there are 36 logic elements/cells.
LC4064ZC-5T48C Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~90°C TJ
48 pin count
48 pins
LC4064ZC-5T48C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5T48C CPLDs applications.
- Page register
- INTERRUPT SYSTEM
- D/T registers and latches
- Auxiliary Power Supply Isolated and Non-isolated
- Software Configuration of Add-In Boards
- Cross-Matrix Switch
- Random logic replacement
- Timing control
- Multiple DIP Switch Replacement
- PLC analog input modules
