LC4064ZC-5TN48I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LC4064 |
| Pin Count | 48 |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Number of Logic Elements/Cells | 36 |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LC4064ZC-5TN48I Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].In this case, there are 32 I/Os programmed.There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.Trayshould be used to package the chip.Ensure its reliability by operating at [0].It is mounted in the way of Surface Mount.The ispMACH? 4000Zseries FPGA is one of these types.With 48pins programmed, the chip is ready to use.The device can also be used to find [0].You can find its related parts in the [0].It is recommended that the supply voltage be kept at 1.8Vto maximize efficiency.Data storage is performed using [0].Surface Mountis used to mount this electronic component.There are 48 pins embedded in the device.It operates at a maximum supply voltage of 1.9V volts.A minimum supply voltage of 1.7V is required for it to operate.A total of 4logic elements/blocks are present.A total of 484Programmable I/Os are present.The frequency that can be achieved is 250MHz.The status of input signals is detected by 4dedicated inputs.The fundamental building block consists of 36logic elements/cells.
LC4064ZC-5TN48I Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~105°C TJ
48 pin count
48 pins
LC4064ZC-5TN48I Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-5TN48I CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- TIMERS/COUNTERS
- Dedicated input registers
- Timing control
- DDC INTERFACE
- POWER-SAVING MODES
- Digital multiplexers
- White goods (Washing, Cold, Aircon ,...)
- Voltage level translation
- Address decoders
