LC4064ZC-75M56C
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-LFBGA, CSPBGA |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Published | 2000 |
| Series | ispMACH® 4000Z |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LC4064 |
| Pin Count | 56 |
| JESD-30 Code | S-PBGA-B56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 1.9V |
| Min Supply Voltage | 1.7V |
| Operating Supply Current | 80μA |
| Number of I/O | 32 |
| Nominal Supply Current | 80μA |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Max Frequency | 250MHz |
| Number of Programmable I/O | 484 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 12 |
| Voltage Supply - Internal | 1.7V~1.9V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 4 |
| Height Seated (Max) | 1.35mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LC4064ZC-75M56C Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a 56-LFBGA, CSPBGA package.The device is programmed with 32 I/Os.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of BOTTOM.Power is supplied by a voltage of 1.8V volts.This part is included in Programmable Logic Devices.It is recommended to package the chip by Tray.The operating temperature of the machine is 0°C~90°C TJ to ensure its reliability.It is recommended to mount the chip by Surface Mount.The FPGA belongs to the ispMACH? 4000Z series.In this chip, the 56pins are programmed.This device is also capable of displaying [0].According to the LC4064, its related parts can be found.The supply voltage should be maintained at 1.8V for high efficiency.It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.A maximum supply voltage of 1.9Vis used in its operation.Normally, it operates with a voltage of 1.7VV as its minimum supply voltage.There are 4 logic elements or blocks present.A total of 484 Programmable I/Os are available.It is recommended that the maximal frequency be lower than 250MHz.The status of input signals is detected by 12dedicated inputs.
LC4064ZC-75M56C Features
56-LFBGA, CSPBGA package
32 I/Os
The operating temperature of 0°C~90°C TJ
56 pin count
LC4064ZC-75M56C Applications
There are a lot of Lattice Semiconductor Corporation LC4064ZC-75M56C CPLDs applications.
- Parity generators
- LED Lighting systems
- Power Meter SMPS
- Voltage level translation
- PULSE WIDTH MODULATION (PWM)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- Protection relays
- D/T registers and latches
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
